CE1256 – STRENGTH OF MATERIALS LABORATORY
CE1256 – STRENGTH OF MATERIALS LABORATORY
L T P C
0 0 3 2
LIST OF EXPERIMENTS
1. Test involving axial compression to obtain the stress – strain curve
2. Test involving axial tension to obtain the stress – strain curve and the strength
3. Test involving torsion to obtain the torque vs. angle of twist and hence the
stiffness
4. Test involving flexure to obtain the load deflection curve and hence the stiffness
5. Tests on springs
6. Hardness tests
7. Shear test
8. Test for impact resistance
9. Tests on Cement Total :45
The student should learn the use of deflectometer, extensometer, compressometer and
strain gauges.
LIST OF EQUIPMENTS
(For a batch of 30 students)
Sl. No. Description of Equipments Quantity
1. UTM of minimum 400 KN capacity 1 No.
2. Torsion testing machine for steel rods 1 No
3. Izod impact testing machine 1 No
4.
Hardness testing machine
Rockwell
Vicker’s (any 2)
Brinnel
1 each
5. Beam deflection test apparatus 1 No
6. Extensometer 1 No
7. Compressometer 1 No
8. Dial gauges Few
9 Le Chatelier’s apparatus 2 Nos.
10 Vicat’s apparatus 2 Nos.
11 Mortar cube moulds 10 Nos. CE1257 – HYDRAULIC ENGINEERING LABORATORY
L T P C
0 0 3 2
LIST OF EXPERIMENTS
1. Determination of co-efficient of discharge for orifice
2. Determination of co-efficient of discharge for notches
3. Determination of co-efficient of discharge for venturimeter
4. Determination of co-efficient of discharge for orifice meter
5. Study of impact of jet on flat plate (normal / inclined)
6. Study of friction losses in pipes
7. Study of minor losses in pipes
8. Study on performance characteristics of Pelton turbine.
9. Study on performance characteristics of Francis turbine
10. Study on performance characteristics of Kaplan turbine
11. Study on performance characteristics of Centrifugal pumps (Constant speed /
variable speed)
12. Study on performance characteristics of reciprocating pump.
Total :45
LIST OF EQUIPMENTS
1. Bernoulli’s theorem – Verification Apparatus - 1 No.
2. Calculation of Metacentric height
Water tank - 1 No.
Ship model with accessories - 1 No.
3. Measurement of velocity
Pirot tube assembly - 1 No.
4. Flow measurement
Open channel flow
(i) Channel with provision for fixing notches
(rectangular, triangular and trapezoidal forms) - 1 Unit
(ii) Flume assembly with provisions for conducting
experiments on Hydraulic jumps, generation of
surges etc. - 1 Unit
5. Flow measurement in pipes
(i) Venturimeter, U tube manometer fixtures like
Valves, collecting tank - 1 Unit
(ii) Orifice meter, with all necessary fittings in
pipe lines of different diameters - 1 Unit
(iii) Calibration of flow through orifice tank with
Provisions for fixing orifices of different shapes,
collecting tank - 1 Unit
(iv) Calibration of flow through mouth piece
Tank with provisions for fixing mouth pieces
Viz external mouth pieces and internal mouth piece
Borda’s mouth piece - 1 Unit
6. Losses in Pipes
Major loss – Friction loss
Pipe lengths (min. 3m) of different diameters with
Valves and pressure rapping and collecting tank - 1 Unit
Minor Losses
Pipe line assembly with provisions for having
Sudden contractions in diameter, expansions
Bends, elbow fitting, etc. - 1 Unit
7. Pumps
(i) Centrifugal pump assembly with accessories
(single stage) - 1 Unit
(ii) Centrifugal pump assembly with accessories
(multi stage) - 1 Unit
(iii) Reciprocating pump assembly with accessories - 1 Unit
(iv) Deep well pump assembly set with accessories - 1 Unit
8. Turbine
(i) Impulse turbine assembly with fittings
and accessories - 1 Unit
(ii) Francis turbine assembly with fittings
and accessories - 1 Unit
(iii) Kaplan turbine assembly with fittings
and accessories - 1 Unit
L T P C
0 0 3 2
LIST OF EXPERIMENTS
1. Test involving axial compression to obtain the stress – strain curve
2. Test involving axial tension to obtain the stress – strain curve and the strength
3. Test involving torsion to obtain the torque vs. angle of twist and hence the
stiffness
4. Test involving flexure to obtain the load deflection curve and hence the stiffness
5. Tests on springs
6. Hardness tests
7. Shear test
8. Test for impact resistance
9. Tests on Cement Total :45
The student should learn the use of deflectometer, extensometer, compressometer and
strain gauges.
LIST OF EQUIPMENTS
(For a batch of 30 students)
Sl. No. Description of Equipments Quantity
1. UTM of minimum 400 KN capacity 1 No.
2. Torsion testing machine for steel rods 1 No
3. Izod impact testing machine 1 No
4.
Hardness testing machine
Rockwell
Vicker’s (any 2)
Brinnel
1 each
5. Beam deflection test apparatus 1 No
6. Extensometer 1 No
7. Compressometer 1 No
8. Dial gauges Few
9 Le Chatelier’s apparatus 2 Nos.
10 Vicat’s apparatus 2 Nos.
11 Mortar cube moulds 10 Nos. CE1257 – HYDRAULIC ENGINEERING LABORATORY
L T P C
0 0 3 2
LIST OF EXPERIMENTS
1. Determination of co-efficient of discharge for orifice
2. Determination of co-efficient of discharge for notches
3. Determination of co-efficient of discharge for venturimeter
4. Determination of co-efficient of discharge for orifice meter
5. Study of impact of jet on flat plate (normal / inclined)
6. Study of friction losses in pipes
7. Study of minor losses in pipes
8. Study on performance characteristics of Pelton turbine.
9. Study on performance characteristics of Francis turbine
10. Study on performance characteristics of Kaplan turbine
11. Study on performance characteristics of Centrifugal pumps (Constant speed /
variable speed)
12. Study on performance characteristics of reciprocating pump.
Total :45
LIST OF EQUIPMENTS
1. Bernoulli’s theorem – Verification Apparatus - 1 No.
2. Calculation of Metacentric height
Water tank - 1 No.
Ship model with accessories - 1 No.
3. Measurement of velocity
Pirot tube assembly - 1 No.
4. Flow measurement
Open channel flow
(i) Channel with provision for fixing notches
(rectangular, triangular and trapezoidal forms) - 1 Unit
(ii) Flume assembly with provisions for conducting
experiments on Hydraulic jumps, generation of
surges etc. - 1 Unit
5. Flow measurement in pipes
(i) Venturimeter, U tube manometer fixtures like
Valves, collecting tank - 1 Unit
(ii) Orifice meter, with all necessary fittings in
pipe lines of different diameters - 1 Unit
(iii) Calibration of flow through orifice tank with
Provisions for fixing orifices of different shapes,
collecting tank - 1 Unit
(iv) Calibration of flow through mouth piece
Tank with provisions for fixing mouth pieces
Viz external mouth pieces and internal mouth piece
Borda’s mouth piece - 1 Unit
6. Losses in Pipes
Major loss – Friction loss
Pipe lengths (min. 3m) of different diameters with
Valves and pressure rapping and collecting tank - 1 Unit
Minor Losses
Pipe line assembly with provisions for having
Sudden contractions in diameter, expansions
Bends, elbow fitting, etc. - 1 Unit
7. Pumps
(i) Centrifugal pump assembly with accessories
(single stage) - 1 Unit
(ii) Centrifugal pump assembly with accessories
(multi stage) - 1 Unit
(iii) Reciprocating pump assembly with accessories - 1 Unit
(iv) Deep well pump assembly set with accessories - 1 Unit
8. Turbine
(i) Impulse turbine assembly with fittings
and accessories - 1 Unit
(ii) Francis turbine assembly with fittings
and accessories - 1 Unit
(iii) Kaplan turbine assembly with fittings
and accessories - 1 Unit
About Author:
I am Thomas Britto here to share my experiences in the civil engineering field to all my readers.Today many students are struggling to buy books at high prices. So I decided to start a blog and share my experience and knowledge with all my readers.
Let's Get Connected: Twitter | Facebook | Google Plus
No comments
Post a Comment