New Updates

LIST OF INDIAN STANDARDS CODE BOOKS relevant to the Civil Engineering work

Indian Standard
LIST OF INDIAN STANDARDS CODE BOOKS:

Following are the various Indian Standards, relevant to the Civil Engineering work:
(Latest Revision to be referred.)

4082-1977  Recommendations  on  stacking  &  storage  of  construction  materials at site.

Earth Work:

1200 (Pt. I) -1992
4081-1986 Method of measurement of Earth work safety code for Blasting
and related drilling Operations.
  6313 (pt. II)-1981          Anti-termite measures in buildings 
(Part II - Pre-constructional chemical treatment).

         Mortar :  
  196-1966  Atmospheric conditions for testing
  269-1989  Ordinary, rapid hardening and low heat Portland cement
  383-1970  Coarse and fine aggregates from natural sources for Concrete
  455-1989  Portland blast furnace slag cement
  650-1991  Standard sand for testing of cement
  712-1984  Building Lines
  1489-1991  Portland Pozzolana cement
  1514-1990  Methods of sampling & Test for quick lime and Hydrated lime
  1542-1992  Sand for plastering
  1727-1967  Methods of tests for pozzolanic materials
  2250-1981  Code of practice for preparation and use of masonry Mortar
  2386 pt. I-1977  Particle size and shape
  2386 Pt.II_1977  Estimation of deleterious materials and organic impurities
  2386 pt. III-1977  Specific gravity, density, voids, absorption and bulking
  2686-1977  Cinder as fine aggregate for use of lime concrete
  3025-1987  Methods of sampling and test (physical and chemical) water
used in industry
  3068-1986  Broken brick (burnt clay) coarse aggregate for use in lime
concrete (II-R)
  3182-1986  Broken brick(burnt clay) fine aggregate for use in lime mortar
  3812-1981  Fly ash
  3812pt.I  Fly ash for use as pozzolana
  3812pt.II  Fly ash for use as admixture for concrete
  3812pt III  Fly ash for use as fine aggregate for mortar and concrete
  4031-1988  Methods of physical tests for hydraulic cement
  4032-1985  Method of chemical analysis of hydraulic cement
  4098-1983  Lime pozzolana mixture
  6932(pt.I to X)  Methods of test for building lime
  6932 (pt.I)-1973  Determination of insoluble residue, loss of ignition, insoluble
matter, silicon-dioxide, ferric and aluminum oxide, calcium
oxide and magnesium oxide.
  6932 (pt.II)-1973  Determination of carbon dioxide content
  6932(pt.III)-1973  Determination of residue on slaking of quick lime
  6932 (pt.IV) -
1973 

Determination of fineness of hydrated lime
 
6932 (ptV)-1973  Determination of un hydrated oxide
  6932(pt.VI)-1973  Determination of volume yield of quick lime
  6932 (ptVII)-1973          Determination of compressive and transverse strength P -4

  6932(pt.VIII)-1973         Determination of workability
  6932 (pt.IX)-1973          Determination of soundness
  6932(pt.X)-1973  Determination of popping and pitting of hydrated lime
4.        Concrete work:
  383-1970  Coarse and fine aggregates from natural sources for Concrete
  456-2000  Code of practice for plain and reinforced concrete
  515-1959  Specifications for natural and manufactured aggregate for use
in mass concrete
  516-1959  Method of test for strength of concrete
  1198-1959  Method of sampling and analysis of concrete
  1200(pt.II)-1974  Methods of measurements of cement concrete work
  1322-1982  Bitumen felts for water proofing and damp proofing
  1661-1987(pt.III)  Code of practice for application of cement lime plaster finishes
  2386-1977  Methods of test for aggregate for concrete
  2386(pt.I)-1977  Test for particle size and shape
  2386(pt.II)-1977  Test for estimation of deleterious materials and organic
impurities.
  2386(pt.III)-1977  Test for specific gravity, density. voids, absorption an bulking
  238686(pt.IV)-1977        Mechanical properties
  2645-1975  Specification for integral water proofing compounds
  2686-1977  Specification for cinder aggregate for use in lime concrete
  3812-1981  Fly ash
  3812(pt.I)  Fly ash for use as pozzolana for concrete
  3812(pt.II)  Fly ash for use as admixture for concrete
  3812(pt.III)  Fly ash for use as fine aggregate for mortar and concrete
  7861-1975(pt.I)  Hot weather concreting
  7861-1981(pt.II)  Cold weather concreting
  9103-1979  Admixture for concrete

       RCC Work:
  432-1982  Mild steel and medium tensile steel bars and hard drawn steel
wire for concrete reinforcement
  432(pt.I)-1982  Mild steel and medium tensile steel bars
  456-1978  Code of practice for plain and reinforced concrete
  457-1957  Code of practice for general construction of plain an reinforced
concrete for dams and other massive structure
  516-1959  Methods of test for strength of concrete
  1139-1966  Hot rolled mild steel, medium tensile steel and high yield
strength steel deformed bars for concrete reinforcement
  1199-1959  Methods of sampling ad analysis of concrete
  1200(pt.II)-1974  Methods of measurement of cement concrete work
  1200(pt.V)-1982  Method of measurement of form work
  1343-1980  Code of practice for priestesses concrete
  1566-1985  Hard drawn steel wire fabric for concrete reinforcements
  1780-1961  Specifications for cold twisted steel bars for concrete
reinforcement
  1785-1983  Specifications for plain hard draw steel wire for pre-stressed
concrete
  1786-1985  Cold twisted steel bars for concrete reinforcement
  2080-1980  Specifications for high tensile steel bars used in pre-stressed
concrete
  2204-1962  Code of practice for construction of reinforced concrete shell
roof.V- Page 6 of 197
  2210-1962  Criteria for the design of steel structure and folded plates. P -5

  2502-1963  Code of practice for bending and fixing of bars for concrete
reinforcement
  2751-1979  Code of practice for welding of mild steel bars used for
reinforced concrete construction
  2911-1979  Code of practice for design and construction of pile
Foundations
  2911(pt.I)-1979  Load bearing concrete piles
  2911(pt.III)-1980  Under reamed pile foundations
  3201-1988  Criteria for design and construction of precise concrete trusses
  3370(part I to
IV)-1965
Code of practice for concrete structures for storage of liquids
  3385-1986  Code of practice for measurement for Civil Engineering works.
  3414-1968  Code of practice for design and installation of joints in
buildings
  3588-1987  Code of practice for use of immersion vibrators for
consolidating concrete
  3935-1966  Code of practice for composite construction
  4014-1967(pt.I
&II)

Code of practice for steel tubular scaffolding (I: Definition /
Material: II: Safety Regulations)

  4990-1981  Specifications for plywood for concrete shuttering work 10262
Code of practice for design mix

         Equipments:

  460-1985  Specification for test sieves
  1791-1985  Specification for batch type concrete missed
  2430-1986  Specification for roller pan mixer
  2585-1968  Specification for concrete vibrators, immersion type
  2806-1964  Specification for screen board concrete vibrators
  2514-1963  Specification for concrete vibrating tables
  3366-1965  Specification for pan vibrators
  4656-1968  Specification for form vibrators for concrete
  2722-1964  Specification for portable swing weight batchers for concrete
(single and double bucket type)
  2750-1964  Specification for steel scaffolding.

        Brick work:

  1077-1986  Common burnt clay building bricks
  1200(pt.III)-1976  Method of measurements of brick work
  2116-1980  Sand for masonry mortars
  2212-1962  Code of practice for brick work
  2250-1981  Code of practice for preparation & use of masonry Mortar
  3102-1971  Classification of burnt clay solid bricks
  3495(pt.I to IV)-1976     Method of test for clay building work
  5454-1978  Method for sampling for sampling of clay building bricks
     
   Stone Work:

  1121-(pt.I)-1974  Methods for determination of compressive, transverse and
shear strengths of natural building stones
  1122-1974  Methods for determination of specific gravity and porosity of
natural building stones
  1123-1975  Methods of test for water absorption of natural building stones
  1124-1974  Methods of test for absorption of natural building stones
  1125-1974  Methods of test for weathering of natural building stones
  1126-1974  Methods of test for durability of natural building stones.
  1129-1972  Dressing of natural building stones
  1200(pt.IV)-1976  Method of measurement of stone masonry. P -6

  1597-1967  Code of practice for construction of rubble stone masonry
  1597(pt.I)-1992  Code of practice for construction of masonry
  1597(pt.II)-1992  Code of practice for construction of Ashlar masonry
  1805-1973  Glossary of items relating to stone quarrying and Dressing
  4101(pt.I)-1967  Stone facing

        Marble work:

  1122-1974  Methods for determination of specific gravity and porosity of
natural building stones
  1124-1974  Methods of test for water absorption of natural building stones
  1130-1969  Marble (blocks, slabs and tiles)
10      Wood work:
  204-1991/92  Tower bolts (Part 1-1991:ferrous metals : part –II-1992:non
ferrous metals)
  205-1992  Non-ferrous metal butt hinges
  206-1992  Tee and strap hinges
  207-1964  Gate and shutter hooks and eyes
  208-1987  Door handles
  281-1991  Mild steel sliding door bolts for use with padlocks
  287-1973  Recommendation for maximum permissible moisture contents
of timer used for different purposes.
  303-1989  Plywood for general purpose
  362-1991  Parliament hinges
  363-1993  Hasps and staples
  364-1993  Fanlight catch
  401-1982  Code of practice for preservation of timber
  451-1973  Technical supply condition for wood screws
  452-1973  Door springs, rail-tail type
  453-1993  Double acting spring hinges
  723-1972  Steel counter sunk head wire nails
  729-1979  Drawer locks, cup board locks and box locks
  848-1974  Synthetic resin adhesive for plywood (phenolic and amino
plastic)
  851-1978  Synthetic resin adhesive for construction work
  852-1994  Specifications for animal glue for general wood working
purposes
  1003  Timer paneled and glazed shutters
  1003(pt.I)-1991  Door shutters
  1003(pt.-II)-1994  Window and ventilator shutters
  1019-1974  Rim latches
  1141-1993  Code of practice for seasoning of timer
  1200  Method of measurement and Building of Civil Engineering
Works
  1200(pt.XIV)-1984          Glazing
  1200(pt.XXI)-1973          Wood work and joinery
  1322-1993  Bitumen felts for water proofing and damp proofing
  1328-1982  Veneered decorative plywood
  1341-1992  Steel Butt hinges
  1378-1987  Oxidized copper finished
  1568-1970  Wire cloth for general purposes
  1629-1960  Rules for grading of out size of timer
  1658-1977  Fiber hard board
  1659-1990  Block boards
  1823-1980  Floor door stoppers P -7

  1868-1982  Anodic coating on Aluminum
  1911-1967  Schedule of unit weights of building materials
  2191-1983  Wooden flush door shutter (cellular and hollow core type)
  2191(pt.I)-1983  Plywood face panels
  2191(pt.II)-1983  Particle board face panels for wooden flush door shutters
  2202  Wooden flush door shutters (solid core type)
  2202(pt.I)-1991  Plywood face panels for wooden flush door shutters
  2202(pt.II)-1983  Particle board face panels for wooden flush door shutters
  2209-1976  Mortise locks (vertical type)
  2380-1981  Method of test for wood particle board and boards from
lignocelluloses materials
  2681-1993  Non-ferrous metal sliding door bolts for use with pad locks
  2835-1987  Flat transparent sheet glass (3 rd  revision)
  3087-1985  Wood particle boards (medium density) for general purpose
  3097-1980  Veneered particle boards (1 st  Revision)
  3400  Method of test for vulcanized rubbers
  3400(pt.II)-1980  Hardness
  3400(pt.IV)-1987  Accelerated aging
  3400(pt.IX)-1978  Relative density and density
  3564-1986  Door closers (hydraulically regulated)
  3618-1966  Phosphate treatment of iron and steel of protection against
corrosion
  3813-1987  “C” hooks for use with swivels
  3818-1992  Continuous (piano) hinges
  3847-1992  Mortise night latches
  4020-1967  Methods of tests for wooden flush doors (type tests)
  4021-1983  Timber door, windows and ventilator frames
  4827-1983  Electroplated coating of nickel and chromium on copper and
copper alloys.
  4948-1974  Welded steel wire fabric for general use
  4992-1975  Door handles for mortise locks (vertical type)
  5187-1972  Flush bolts
  5523-1983  Method of testing anodic coating on aluminum and its alloys
  5930-1970  Mortise latch (vertical types)
  6318-1971  Plastic window stays and fasteners
  6607-1972  Rebated mortise locks (vertical type)
  6760-1972  Slotted countersunk head wood screws
  7196-1974  Hold fasts
  7197-1974  Double action floor springs (without oil check for heavy doors)
  7534-1985  Mild steel bolts with holders for padlocks

      Steel Work:

  63-1978  Whiting for paints
  198-1978  Varnish, gold size
  226-1975  Structural steel (standard quality)
  277-1985  Specification for galvanized steel sheets (plain and corrugated)
  278-1978  Galvanized steel barbed wire for fencing
  800-1984  Code of practice for use of structural steel in General building
construction.
  806-1968  Code of practice for use of steel tube in general building
construction
  813-1986  Scheme of symbols for welding
  814-1991  Covered electrodes for metal are welding of structural steel.
  814(pt.I)-1974  For welding products other than sheets P -8

  814(pt.II)-1974  For welding sheets
  815-1974  Classification and coding of covered electrodes for metal are
welding of mild steel and low alloy high tensile steel.
  817-1966  Code of practice for training and testing of metal are welders
  818-1968  Code of practice for safety and healthy requirements in
electric and gas welding and cutting operation.
  1038-1983  Steel doors, windows and ventilators
  1081-1960  Code of practice for fixing and glazing of metal (steel and
aluminum) door, windows and ventilators)
  1148-1982  Hot rolled steel river bars (up to 40mm diameters) for
structural purposes
  1161-1979  Steel tubes for structural purposes
  1182-1983  Recommended practice for radiographic examination of fusion
welded joints in steel plates
  1200-1974  Method of measurements of steel work and iron works
  1363-1984  Hexagon bolts, nuts and lock nuts (dia 6 to 39mm) and black
hexagon screws (dia 6 to 24 mm)
  1599-1985  Method for bend test for steel products other than sheet, strip,
wire and tube
  1608-1972  Method for tensile testing of steel products
  1821-1987  Dimensions for clearance holes for metric bolts
  1852-1985  Rolling and cutting tolerance for hot rolled steel products
  1894-1972  Method for tensile testing of steel tunes
  1977-1975  Structural steel (ordinary quality)
  2062-1984  Structural steel (fusion welding quality)
  4351-1976  Steel door frames
  4736-1986  Hot-dip zinc coatings on steel tubes
  6248-1979  Metal rolling shutters and rolling grills
  7452-1990  Hot rolled steel sections for doors, windows & ventilations

      Flooring :

  210-1978  Grey iron casting
  653-1992  Sheet linoleum
  777-1988  Glazed earthen-ware tiles
  809-1992  Rubber flooring materials for general purpose
  1122-1974  Methods for determination of specific Gravity and porosity of
natural building stones
  1124-1974  Method of test for water absorption of natural building stones
  1130-1969  Marble (blocks, slabs and tiles)
  1197-1970  Code of practice for laying of rubber floors
  1198-1982  Code of practice for laying and maintenance of linoleum floors
  1200(pt.XI)-1977  Method of measurements of paving and floor finished
  1237-1980  Cement concrete flooring tiles
  1443-1972  Code of practice for laying and finishing of Cement concrete
flooring tiles
  1661-1972  Code of practice for application of cement and cement lime
plaster finishes
  2078-1979  Method of tensile testing of gray cast iron
  2114-1984  Code of practice for laying in situ terrazzo floor finish
  2571-1970  Code of practice for laying in situ cement concrete flooring
  3400  Method of test of vulcanized rubbers
  3400(pt.II)-1980  Hardness
  3400(pt.X)-1977  Compression set at constant strain
  3462-1986  Flexible PVC flooring

About Author:

I am Thomas Britto here to share my experiences in the civil engineering field to all my readers.Today many students are struggling to buy books at high prices. So I decided to start a blog and share my experience and knowledge with all my readers.


Let's Get Connected: Twitter | Facebook | Google Plus

No comments