CE1357 – IRRIGATION ENGINEERING AND ENVIRONMENTAL ENGINEERING DESIGN AND DRAWING
CE1357 – IRRIGATION ENGINEERING AND ENVIRONMENTAL
ENGINEERING DESIGN AND DRAWING
L T P C
0 0 3 3
UNIT I IMPOUNDING STRUCTURES 12
Gravity dams – Earth dams – Arch dams – Spill ways – Energy dissipation devices –
Drawing showing plan, elevation, half sections including foundation.
UNIT II CANAL TRANSMISSION STRUCTURES 12
Aqueducts – Syphon aqueducts – Super passage – Canal syphon – Canal drops – Notch
type – Rapid type fall – Syphon well drops – Drawing showing plan, elevation and
foundation details.
UNIT III TANK IRRIGATION STRUCTURES 12
Tank bunds – Tank surplus weirs – Tank sluices weirs on pervious foundations –
Percolation ponds – Detailed drawings showing foundation details, plan and elevation.
UNIT IV WATER TREATMENT PLANT 12
Design and drawing of intake towers – Acrators – Chemical feeding facility – Flocculator
– Clarifier – Settling tanks – Slow sand filter – Rapid sand filter – Pressure filter.
UNIT V SEWAGE TREATMENT PLANTS 12
Design and drawing of screen chamber – Grit channel – Primary clarifier – Activated
sludge process – Aeration tank and oxidation ditch – Trickling filters – Secondary
clarifiers – Upflow anaerobic sludge blanket reactors – Upflow anaerobic filter – Sludge
digester – Sludge drying beds – Stabilisation ponds – Septic tanks.
Total: 60
Note:
The examination will be a three hour one carrying 100 marks. Part – A shall carry one
either or question carrying 50 marks. Part – B shall carry one either or question carrying
50 marks. Part – A and B together will form part of the question paper.
TEXT BOOKS
1. Garg, S.K., “Irrigation Engineering and Design of Structures” Kanna Publishers,
2000.
2. Satyanarayana Murthy Challa, “Water Resources Engineering Principles and
Practice”, 2nd Edition, New Age International (P) Ltd., 2002.
REFERENCES
1. Sharma, R.K., “Irrigation Engineering and Hydraulic Structures”, Oxford and
IBH Publishing Co., 2002.
2. “Manual on Water Supply and Treatment”, CPHEEO, Govt. of India, 2002.
3. “Manual on Sewage and Sewage Treatment”, CPHEEO, Govt. of India, 2003.
ENGINEERING DESIGN AND DRAWING
L T P C
0 0 3 3
UNIT I IMPOUNDING STRUCTURES 12
Gravity dams – Earth dams – Arch dams – Spill ways – Energy dissipation devices –
Drawing showing plan, elevation, half sections including foundation.
UNIT II CANAL TRANSMISSION STRUCTURES 12
Aqueducts – Syphon aqueducts – Super passage – Canal syphon – Canal drops – Notch
type – Rapid type fall – Syphon well drops – Drawing showing plan, elevation and
foundation details.
UNIT III TANK IRRIGATION STRUCTURES 12
Tank bunds – Tank surplus weirs – Tank sluices weirs on pervious foundations –
Percolation ponds – Detailed drawings showing foundation details, plan and elevation.
UNIT IV WATER TREATMENT PLANT 12
Design and drawing of intake towers – Acrators – Chemical feeding facility – Flocculator
– Clarifier – Settling tanks – Slow sand filter – Rapid sand filter – Pressure filter.
UNIT V SEWAGE TREATMENT PLANTS 12
Design and drawing of screen chamber – Grit channel – Primary clarifier – Activated
sludge process – Aeration tank and oxidation ditch – Trickling filters – Secondary
clarifiers – Upflow anaerobic sludge blanket reactors – Upflow anaerobic filter – Sludge
digester – Sludge drying beds – Stabilisation ponds – Septic tanks.
Total: 60
Note:
The examination will be a three hour one carrying 100 marks. Part – A shall carry one
either or question carrying 50 marks. Part – B shall carry one either or question carrying
50 marks. Part – A and B together will form part of the question paper.
TEXT BOOKS
1. Garg, S.K., “Irrigation Engineering and Design of Structures” Kanna Publishers,
2000.
2. Satyanarayana Murthy Challa, “Water Resources Engineering Principles and
Practice”, 2nd Edition, New Age International (P) Ltd., 2002.
REFERENCES
1. Sharma, R.K., “Irrigation Engineering and Hydraulic Structures”, Oxford and
IBH Publishing Co., 2002.
2. “Manual on Water Supply and Treatment”, CPHEEO, Govt. of India, 2002.
3. “Manual on Sewage and Sewage Treatment”, CPHEEO, Govt. of India, 2003.
About Author:
I am Thomas Britto here to share my experiences in the civil engineering field to all my readers.Today many students are struggling to buy books at high prices. So I decided to start a blog and share my experience and knowledge with all my readers.
Let's Get Connected: Twitter | Facebook | Google Plus
No comments
Post a Comment